Photothermal Synergic Cross-Linking Hole Transport Layer for Highly Efficient RGB QLEDs.

Developing an insoluble cross-linkable hole transport layer (HTL) plays an important role for solution-processed quantum dots light-emitting diodes (QLEDs) to fabricate a multilayer device with separated quantum dots layers and HTLs. In this work, a facile photothermal synergic cross-linking strategy is simultaneous annealing and UV irradiation to form the high-quality cross-linked film as the HTL without any photoinitiator, which efficiently reduces the cross-linking temperature to the low temperature of 130 °C and enhances the hole mobility of the 3-vinyl-9-{4-[4-(3-vinylcarbazol-9-yl)phenyl]phenyl}carbazole (CBP-V) thin films. The obtained high-quality cross-linked CBP-V films exhibited smooth morphology, excellent solvent resistance, and high mobility. Moreover, the high-performance red, green, and blue (RGB) QLEDs are successfully fabricated by using the photothermal synergic cross-linked HTLs, which achieved the maximum external quantum efficiency of 25.69, 24.42, and 16.51%, respectively. This work presents a strategy of using the photothermal synergic cross-linked HTLs for fabrication of high-performance QLEDs and advancing their related device applications.

Prediction of the potential distribution area of Spodoptera frugiperda and its parasitic wasp, Trichogramma pretiosum.

Spodoptera frugiperda is a migratory agricultural pest with fast-spreading speed, long migration distance, and wide host range, which seriously threatens the safety of economic crops. To predict the trends of S. frugiperda and its parasitoid wasp Trichogramma pretiosum in their habitats under current and future climatic conditions, based on MaxEnt model and geographic distribution data of their historical occurrence, we project the feasibility of introducing T. pretiosum to control S. frugiperda by evaluating on their potential global distribution. The results show that, under the current greenhouse gas concentration, the potential distribution area of S. frugiperda is concentrated in 50° N-30° S, with a total area of 1.74 × 106 km2 , and the potential distribution area of T. pretiosum in the whole world is 2.91 × 106 km2 . The suitable areas of T. pretiosum cover almost all the suitable areas of S. frugiperda, which indicates that T. pretiosum can be introduced to control S. frugiperda. The results of this study can provide a theoretical basis for the monitoring and early warning of S. frugiperda and the use of T. pretiosum to control S. frugiperda.

Zero-Oil-Fouling Membrane With High Coverage of Grafted Zwitterionic Polymer for Separation of Oil-in-Water Emulsions.

Current hydrophilic modification strategies improve the antifouling ability of membranes but fail to completely eliminate the fouling of emulsified oil droplets with a wide size distribution. Constructing membranes with superior anti-oil-fouling ability to resist various oil droplets especially at high permeation fluxes is challenging. Here, the fabrication of a zero-oil-fouling membrane by grafting considerably high coverage of zwitterionic polymer and building defect-free hydration defense barrier on the surface is reported. A uniform layer of protocatechuic acid with COOH as abundant as existing in every molecule is stably deposited on the membrane so as to provide sufficient reactive sites and achieve dense grafting of the zwitterionic polymer. The coverage of zwitterionic polymer on the membrane plays a crucial role in promoting the antifouling ability to emulsified oil droplets. The poly(vinylidene fluoride) membrane with 93% coverage of the zwitterionic polymer exhibits zero oil fouling when separating multitudinous oil-in-water emulsions with ≈0% flux decline, ≈100% flux recovery, and a high water flux of ≈800 L m-2 h-1 bar-1 . This membrane outperforms almost all of the reported membranes in terms of the comprehensive antifouling performance. This work provides a feasible route for manufacturing super-antifouling membranes toward oil/water separation application.

Fast and Integral Nano-Surface-Coating of Various Fiber Materials via Interfacial Polymerization.

Surface coating is essential and critical to endow fiber materials with various functions for broad applications. However, it is still a great challenge to achieve a fast, fully covered, and robust surface coating on multiple fibers. In this work, a nanoscale surface coating with superior stability was rapidly and integrally formed on various fiber materials (such as Nylon mesh, nonwoven fabrics, and stainless-steel mesh) by highly reactive interfacial polymerization (IP) between polyethylenimine (PEI) and trimesoyl chloride (TMC). The resulting polyamide (PA) layer with an ultrathin thickness of tens of nanometers wholly and uniformly covered the surface of each fiber of the constituent material. Due to the synergistic effect of the PA layer with inherent robustness and the fully covered structure between the outer PA layer and the inner fiber, the nanosurface-coating exhibited outstanding mechanical stability, good acid resistance, and excellent organic solvent resistance. The functional modification of the nanosurface-coating can be easily carried out by using the abundant carboxyl groups in the PA layer. By introducing sulfobetaine zwitterionic copolymers via either "grafting from" or "grafting to" methods, the surfaces presented prominent underwater antioil-adhesion property and exceptional protein adhesion resistance. The surface coating based on IP process opens up an avenue in the field of surface modification. It is expected to offer a generally feasible strategy for the fabrication of fiber materials with robust and multifunctional coatings.

Potential global distribution area projections of the aphid Lipaphis erysimi and its predator Eupeodes corollae in the context of climate change.

Climate change affects the population distribution of pests and their natural enemies, and predicting these effects is necessary for pest monitoring and green control. Lipaphis erysimi is an important vegetable pest, and its natural enemy, the Eupeodes corollae Fabricius has a strong predatory effect on the L. erysimi. To assess the spread trends of L. erysimi and its natural enemy, the hoverfly, E. corollae under current (1970-2000) and future climates (2041-2060), based on the MaxEnt model, this paper uses data on the geographical distribution of the historical occurrence of L. erysimi and E. corollae to speculate on their potential distribution areas worldwide and analyze the key environmental factors affecting the survival and spread of both. The results showed that the Representative Concentration Pathway (RCP) 2.6 and RCP4.5 climatic conditions are favorable for the spread of L. erysimi, the RCP8.5 climatic conditions are unfavorable for the spread of L. erysimi, and all three future climatic conditions are unfavorable for the spread of E. corollae. The highest fitness of L. erysimi was found at the annual average temperature of 18 °C and the annual average precipitation of 900 mm, while the highest fitness of E. corollae was found at the annual average temperature of 10 °C and the lowest temperature in the coldest month of 0 °C. This study can provide a reference basis for monitoring and early warning and biological control of L. erysimi.

Optimization of Sensors Data Transmission Paths for Pest Monitoring Based on Intelligent Algorithms.

The harm of agricultural pests presents a remarkable effect on the quality and safety of edible farm products and the monitoring and identification of agricultural pests based on the Internet of Things (IoT) produce a large amount of data to be transmitted. To achieve efficient and real-time transmission of the sensors' data for pest monitoring, this paper selects 235 geographic coordinates of agricultural pest monitoring points and uses genetic algorithm (GA), particle swarm optimization (PSO), and simulated annealing (SA) to optimize the data transmission paths of sensors. The three intelligent algorithms are simulated by MATLAB software. The results show that the optimized path based on PSO can make the shortest time used for transmitting data, and its corresponding minimum time is 4.868012 s. This study can provide a reference for improving the transmission efficiency of agricultural pest monitoring data, provide a guarantee for developing real-time and effective pest control strategies, and further reduce the threat of pest damage to the safety of farm products.

Function of Vitellogenin receptor gene in reproductive regulation of Zeugodacus cucurbitae (Coquillett) after short-term high-temperature treatment.

Climate change has increased the frequency of extreme heat events. Zeugodacus cucurbitae (Coquillett) is an important tropical pest that typically changes its reproductive strategies in response to extremely high temperatures. Newly emerged adults of three consecutive generations (F1, F2, and F3) of Z. cucurbitae (Coquillett) were exposed to 25°C, 33°C, 37°C, 41°C, and 45°C treatments for 1 h to clarify the effects of short-term high temperatures on its reproduction. The influence of these temperatures on reproduction was evaluated using indicators, such as egg number. Newly emerged adults were exposed to 25°C and 45°C treatments for 1 h, and the expression of Vitellogenin receptor (VgR) gene in females was interfered with siRNA, and silencing efficiency of RNAi was evaluated. Results showed that short-term high temperatures, except for F1 treated at 45°C for 1 h to stimulate oviposition, exert a general adverse effect on the reproduction of Z. cucurbitae (Coquillett). All F3 died after the 45°C treatment for 1 h. Silencing of the VgR gene resulted in the significant downregulation of VgR gene expression at both 24 and 72 h. The egg number, oviposition days, and hatchability of eggs were significantly lower than those of other treatment groups after interference, and the inhibition effect of egg number was the most evident, with a decrease of 88.4% and 95.2% at 25°C and 45°C, respectively, compared with that of the Control Check (CK). Ovarian development speed and diameter were also significantly lower than those of other treatment groups after the interference. The results of this study can provide a theoretical reference for the integrated control of Z. cucurbitae (Coquillett) during high-temperature seasons.

Technology for Rapid Detection of Cyromazine Residues in Fruits and Vegetables: Molecularly Imprinted Electrochemical Sensors.

Cyromazine is an insect growth regulator insecticide with high selectivity and is widely used in the production and cultivation of fruits and vegetables. In recent years, incidents of excessive cyromazine residues in food have occurred frequently, and it is urgent to establish an accurate, fast, and convenient method for the detection of cyromazine residues to ensure the safety of edible agricultural products. To achieve rapid detection of cyromazine residues, we prepared a molecularly imprinted electrochemical sensor for the detection of cyromazine residues in agricultural products. Samples of tomato (Lycopersicon esculentum Miller), cowpea (Vigna unguiculata), and water were tested for the recovery rate of cyromazine. The results showed that the concentration of cyromazine showed a good linear relationship with the peak response current of the sensor developed in this study. The lower limit of detection for cyromazine was 0.5 µmol/L, and the sensor also had good reproducibility and interference resistance. This paper can be used as a basis for the study of methods for the detection of cyromazine residues in edible agricultural products.

Comparative Genomic-Based Study of Reproduction-Related Genes in Three Fruit Fly Species.

Zeugodacus cucurbitae (Coquillett), Bactrocera dorsalis (Hendel), and Ceratitis capitata (Wiedemann) are important pests of fruit and vegetable crops and are difficult to control because of their rapid reproduction rate and egg production. To investigate the key genes regulating reproduction in three fruit fly species, we selected genomic information of three fruit fly species, screened specific genes and single-copy homolog genes, and performed KEGG and GO enrichment analysis on specific genes and single-copy homolog genes of the strong positive select (SP); the results showed that Z. cucurbitae (Coquillett), B. dorsalis (Hendel), and C. capitata (Wiedemann) had seven, 11, and one Vitellogenin-related genes, respectively; Z. cucurbitae (Coquillett) had 84 specific genes enriched in immune system-related pathways; B. dorsalis (Hendel) had 1,121 specific genes enriched in signaling pathways related to cell growth and differentiation; C. capitata (Wiedemann) had 42 specific genes enriched in the degradation and metabolism pathways of exogenous organisms; Z. cucurbitae (Coquillett) may have a stronger immune system; B. dorsalis (Hendel) has a faster developmental and reproductive rate; and C. capitata (Wiedemann) has a higher detoxification capacity. Only one SP single-copy homolog gene (gene name: very long-chain specific acyl-CoA dehydrogenase, mitochondrial) is enriched in the fatty acid metabolic pathway in both Z. cucurbitae (Coquillett) and B. dorsalis (Hendel) as well as in Z. cucurbitae (Coquillett) and C. capitata (Wiedemann). This study provides a molecular basis for studying the reproductive mechanisms of three fruit fly species and provides a scientific basis for developing effective control strategies for fruit flies.

Identification of male and female pupal characteristics of Zeugodacus cucurbitae (Coquillett) via machine vision.

Images of original pupae of Zeugodacus cucurbitae (Coquillett) were normalized, grayed, and segmented to identify male and female pupae of this species via machine vision. The image of each pupa was divided into 25 small areas. The differences in surface texture features in each small area within 11 days were compared. The texture characteristics of both male and female pupae were screened by combining the eclosion of both sexes of Z. cucurbitae (Coquillett). Results indicated that the pectinate setae on the abdominal backplane could be used as a basis for the identification of the male and female pupa of Z. cucurbitae (Coquillett). Moreover, machine vision correctly identified these characteristics with an accuracy of 96.0%. This study lays a foundation for the identification of male and female pupae using machine vision and also for the comprehensive control of Z. cucurbitae (Coquillett).

Dynamic expression analysis of Vitelloin-related genes in Zeugodacus cucurbitae (Coquillett) driven by short-term high-temperature stress.

Zeugodacus cucurbitae (Coquillett) is an important pest of fruit and vegetable crops in tropical and subtropical regions. Previous studies have shown that short-term high-temperature stress has a significant effect on the oviposition behavior of three successive generations (F1 -F3 ) of Z. cucurbitae (Coquillett). For the clarification of the molecular response of the oviposition behavior of Z. cucurbitae (Coquillett) to short-term high-temperature stress, three Vitellogenin (Vg) genes, namely, Vg-1, Vg-2, and Vg-3, and one Vitellogenin receptor (VgR) gene were selected; 25°C was used as the control treatment; and 33°C, 37°C, 41°C, and 45°C were set as the high-temperature treatments. Newly emerged adults of the F1 generation were treated for 1 h, and the expression dynamics of the target genes were analyzed 7 days after the emergence of three successive generations of adults. Results showed that the expression of the Vg gene in the 33°C and 37°C groups was upregulated compared with that in the control group, and the difference among the 41°C, 45°C, and control groups was small. VgR gene expression level gradually increased in each treatment group with the increase in the number of days and peaked on Days 6 and 7. Compared with the control group, the expression of VgR gene in the F1 generation was downregulated in the high-temperature treatment group over 7 days. On Day 7, the expression level of the VgR gene in the F2 and F3 generations in the 37°C and 45°C groups was significantly higher than that in the F2 and F3 generations in the control group. In conclusion, Vg and VgR are transformed and utilized differently after short-term high-temperature treatment.

The vitellogenin receptor gene is involved in lifespan regulation of Zeugodacus cucurbitae (Coquillett) after short-term high-temperature treatment.

Zeugodacus cucurbitae (Coquillett) is a highly damaging agricultural pest in many tropical and subtropical countries around the world and high temperatures usually affect its survival. To clarify the effect of short-term high temperatures on the survival and lifespan of Z. cucurbitae, newly emerged adults of three consecutive generations (F1, F2, and F3) were exposed to 25 °C, 33 °C, 37 °C, 41 °C, or 45 °C treatments for 1 h. The effect of these temperatures on survival and lifespan was evaluated using biological indicators such as lifespan and pupation rate. Then, to study the molecular regulatory mechanism of the lifespan of Z. cucurbitae after short-term high-temperature treatment, we exposed the newly emerged adults to 25 °C or 45 °C treatments for 1 h and used siRNA to interfere with the expression of the vitellogenin receptor (VgR) gene in the female to study the effect of the VgR gene on the lifespan of Z. cucurbitae. The results showed that the survival rate, lifespan, pupae weight, pupation rate, and emergence rate of Z. cucurbitae decreased with increased temperature, while the female sex ratio of offspring increased. The heat resistance of females was higher than that of males. Interference with the expression of the VgR gene resulted in shortening of the female's lifespan by approximately 60% after exposure to 25 °C or 45 °C treatments for 1 h, which indicated involvement of the VgR gene in the regulation of Z. cucurbitae lifespan. This study provides a reference to guide integrated control of Z. cucurbitae in high-temperature seasons.

Smartphone-based molecularly imprinted sensors for rapid detection of thiamethoxam residues and applications.

In order to achieve rapid detection of thiamethoxam residues in mango, cowpea and water, this study modified the screen printed carbon electrode (SPCE) to make a specific molecular imprinting sensor (Thiamethoxam-MIP/Au/rGO/SPCE) for thiamethoxam. An integrated smartphone platform was also built for thiamethoxam residue analysis. The performance of the complete system was analyzed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The system was then applied for the rapid determination of thiamethoxam residues in water, mango and cowpea samples. The results showed that the molecular sensor showed good linearity in the range 0.5-3.0 µmol/L of thiamethoxam. The detection limit of thiamethoxam was 0.5 µmol/L. Moreover, the sensor had good reproducibility and anti-interference performance. The average recovery rates of the pesticide residues in water, mango and cowpea samples were in the range of 90-110% with relative standard deviations < 5%. The rapid detection system for thiamethoxam residue constructed in this study was simple, reliable, reproducible and had strong anti-interference. It has broad application prospects in the field detection of thiamethoxam residue, and serves as a valuable reference for the further development of rapid detection technology of pesticide residues in the field of environment and food safety.

Pseudo-zwitterions self-assembled from polycation and anion clusters showing exceptional water-cleanable anti-crude-oil-adhesion property.

It is of great importance and practical value to develop a facile and operable surface treatment method of materials with excellent antipollution and antiadhesion property, but still a huge challenge. In this work, a series of pseudo-zwitterions are prepared from electrostatic assembly of cationic polyethyleneimine and anionic phosphonic clusters. These pseudo-zwitterionic assemblies provide a strong hydration through electrostatic interaction with water and in turn create a barrier against oil foulants, leading to a nearly zero crude oil adhesion force. The pseudo-zwitterions-decorated surfaces exhibit exceptional water-cleanable oil-repellent property, even when they are completely dried and without prehydration before fouled by crude oil. While using these pseudo-zwitterions-modified polymeric membranes for separating surfactant stabilized oil-in-water emulsion, less than 10% decline of permeating flux is observed throughout a 2-h continuous separation experiment, showing excellent emulsion separation ability and antipollution performance for high viscous oil.

Analysis of imidacloprid residues in mango, cowpea and water samples based on portable molecular imprinting sensors.

Imidacloprid is a neonicotinoid insecticide widely used in the production and cultivation of crops. In recent years, the extensive use of imidacloprid in agricultural production has resulted in large amounts of pesticide residues in agricultural products and the environment. Therefore, it is necessary to establish a rapid, accurate, sensitive and convenient method for detecting imidacloprid pesticide residues to ensure the safety of agricultural products and the environment. To clarify how to use the molecular imprinting method for the electrochemical rapid residue detection of imidacloprid. This paper selected reduced graphene oxide and gold nanoparticles as modifiers modified on screen-printed carbon electrodes (SPCE) chitosan as a functional monomer, and imidacloprid as template molecule to prepare molecularly imprinted polymer, and applied this sensor to the residue detection of imidacloprid. The results showed that the concentration of imidacloprid showed a good linear relationship with the peak response current, and the detection limit of imidacloprid was 0.5 µM, while the sensor had good repeatability and interference resistance. The recoveries of imidacloprid spiked on three samples, mango, cowpea and water, were in the range of 90-110% (relative standard deviation, RSD<5%), which proved the practicality and feasibility of the assay established in this paper. The results of this paper can be used as a basis for the research on the detection of imidacloprid pesticide residues in food or environment.

Correction: High performance blue quantum dot light-emitting diodes by attaching diffraction wrinkle patterns.

Correction for 'High performance blue quantum light-emitting diodes by attaching diffraction wrinkle patterns' by Hui Qi et al., Nanoscale, 2021, DOI: 10.1039/D1NR00082A.

High performance blue quantum light-emitting diodes by attaching diffraction wrinkle patterns.

Highly efficient blue quantum-dot light-emitting diodes (QLEDs) are still challenging to use in displays and solid-state lighting. Enhancing light outcoupling is one of the most effective methods to improve the performance of blue QLEDs. Here, a strategy for a spectrally independent boost in light outcoupling of blue QLEDs is demonstrated by quasi-periodic wrinkles, which are successfully used as a diffraction grating for extracting trapped light at the substrate/air interface. The quasi-periodic wrinkles can be adjusted from nano-scale to micron-scale under the condition of a constant aspect ratio, and the optimized wrinkle device shows a maximum luminance of 11 769 cd m-2 and a peak EQE of 15.41%. The enhancement of EQE is 49.5% higher compared to that of the reference device. Furthermore, simulation and calculation also indicate that external micron-scattering wrinkle patterns are an attractive option for boosting the performances of blue QLEDs.

Quantum dot light-emitting diodes with an Al-doped ZnO anode.

A study of hybrid ZnCdSeS/ZnS quantum dot light-emitting diodes (QLEDs) device fabricated with indium tin oxide-free transparent electrodes is presented. Al-doped zinc oxide (AZO) prepared by magnetron sputtering is adopted in anode transparent electrodes for green QLEDs with different sputtering pressures. A Kelvin probe force microscopy measurement showed that AZO has a work function of approximately 5.0 eV. The AZO/poly(ethylene-dioxythiophene)/polystyrenesulfonate (PEDOT:PSS) interface can be adjusted by the sputtering pressures, which was confirmed by hole-only devices. AZO films with low surface roughness can form a good AZO/PEDOT:PSS interface, which can increase the holes' injection, and result in an improved charge balance. The maximum current efficiency, luminance, and external quantum efficiency of the optimized QLED devices under a sputtering pressure of 1 mTorr can achieve values of 50.75 cd A-1, 102 500 cd m-2, and 12.94%, respectively.

Light extraction from quantum dot light emitting diodes by multiscale nanostructures.

Improving the light extraction efficiency by introducing optical-functional structures outside of quantum dot light emitting diodes (QLEDs) for further enhancing the external quantum efficiency (EQE) is essential for their application in display and lighting industries. Although the efficiency of QLEDs has been optimized by controlling the synthesis of the quantum dots, the low outcoupling efficiency is indeed unresolved because of total internal reflections, waveguides and metal surface absorptions within the device. Here, we utilize multiscale nanostructures attached to the outer surface of the glass substrate to extract the trapped light from the emitting layers of QLEDs. The result indicates that both the EQE and luminance are improved from 12.29% to 17.94% and 122 400 cd m-2 to 178 700 cd m-2, respectively. The maximum EQE and current efficiency improve to 21.3% and 88.3 cd A-1, respectively, which are the best performances among reported green QLEDs with light outcoupling nanostructures. The improved performance is ascribed to the elimination of total internal reflection by multiscale nanostructures attached to the outer surface of the QLEDs. Additionally, the simulation results of the finite-difference time domain (FDTD) also demonstrate that the light trapping effect is reduced by the multiscale nanostructures. The design of novel light outcoupling nanostructures for further improving the efficiency of QLEDs can promote their application in display and lighting industries.

Zwitterionic Nanohydrogels-Decorated Microporous Membrane with Ultrasensitive Salt Responsiveness for Controlled Water Transport.

Highly sensitive responsiveness is vital for stimuli-responsive membranes. However, it is a great challenge to fabricate stimuli-responsive membranes with ultrahigh gating ratio (the ratio of the salt solution permeating flux to the pure water permeating flux) and high response speed simultaneously. In this work, a salt-responsive membrane with an ultrahigh gating ratio is fabricated via a facile strategy by grafting zwitterionic nanohydrogels onto a poly(acrylic acid)-grafting-poly(vinylidene fluoride) (PAA-g-PVDF) microporous membrane. Due to the synergistic effect of two functional materials, PAA chains and zwitterionic nanohydrogels tethered on PAA chains, this stimuli-responsive membrane exhibits an ultrasensitive salt responsiveness with a gating ratio of up to 8.76 times for Na+ ions, 89.6 times for Mg2+ ions, and 89.3 times for Ca2+ ions. In addition, such zwitterionic nanohydrogels-grafted PAA-g-PVDF (ZNG-g-PVDF) membranes exhibit very rapid responses to stimuli. The permeating flux changes swiftly while altering the feed solution in a continuous filtration process. The excellent salt-responsive characteristics endow such a ZNG-g-PVDF membrane with great potential for applications like drug delivery, water treatment, and sensors.